Danfoss XD58 Cast Iron Gear Pumps
Get a quick quote
Danfoss D-Series and DX-Series Cast Iron Gear Pumps is specifically designed for maximum efficiency, dependability, durability and reliability in performing continuous operation in heavy duty applications with severe duty cycles and temperature conditions, all within the industry leading package size and power density.
The broad range of shaft drives, integrated valves, and side or rear port options gives great flexibility in system design. Coupled with the modularity and compact nature of the D-series of pumps, a wide array of applications rely on the D-pumps.
20% smaller than conventional gear products, our cast iron gear pumps give great power density in a small package.
Feature
Here is a list of features for Danfoss cast iron gear pumps:
- Thrust plate design for high efficiency over a wide temperature range
- Teflon® coated bushings for extended life under extreme temperature and pressure conditions
- High strength cast iron construction for efficient performance in continuous operation
- Easy installation due to compact, power-dense design
- Viton® seals as standard to sustain higher temperature and fluid capabilities
- A variety of integrated valve options for customization and optimization in different applications
- Low noise operation
- High performance and reliability in a wide range of applications, including hydraulic systems, lubrication systems, and other industrial processes.
Specifications
| Frame size | Frame size | Frame size | Frame size | Frame size | Frame size | Frame size | Frame size | Frame size | Frame size | Frame size | Frame size | Frame size | Frame size | Frame size | Frame size | ||
| 7 | 10 | 11 | 13 | 14 | 17 | 19 | 21 | 23 | 25 | 29 | 32 | 36 | 38 | 41 | 45 | ||
| Displacement | cm3/rev [in3/rev] |
7.0 [0.43] |
9.50 [0.58] |
10.8 [0.66] |
12.6 [0.77] |
14.3 [0.87] |
17.0 [1.04] |
19.0 [1.16] |
20.5 [1.25] |
22.5 [1.37] |
25.4 [1.55] |
29.00 [1.77] |
31.8 [1.94] |
36.1 [2.20] |
38.0 [2.32] |
41.0 [2.50] |
45.1 [2.75] |
| Rated pressure | bar [psi] |
276 [4000] |
276 [4000] |
276 [4000] |
276 [4000] |
276 [4000] |
276 [4000] |
276 [4000] |
276 [4000] |
276 [4000] |
276 [4000] |
276 [4000] |
276 [4000] |
241 [3500] |
228 [3300] |
207 [3000] |
190 [2750] |
| Peak pressure | bar [psi] |
303 [4400] |
303 [4400] |
303 [4400] |
303 [4400] |
303 [4400] |
303 [4400] |
303 [4400] |
303 [4400] |
303 [4400] |
303 [4400] |
303 [4400] |
303 [4400] |
265 [3850] |
250 [3630] |
228 [3300] |
209 [3025] |
| Min speed | min-1 (rpm) | 1200 | 900 | 900 | 700 | 700 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 | 600 |
| Max speed | min-1 (rpm) | 3400 | 3400 | 3400 | 3400 | 3400 | 3400 | 3400 | 3400 | 3400 | 3400 | 3200 | 3000 | 2750 | 2750 | 2500 | 2500 |
| Theoretical flow at max speed |
l/min [US gal/min] |
24.0 [6.3] |
32.3 [8.5] |
36.7 [9.7] |
42.9 [11.3] |
48.5 [12.8] |
57.9 [15.3] |
64.6 [17.1] |
69.6 [18.4] |
76.3 [20.2] |
86.4 [22.8] |
92.8 [24.5] |
95.4 [25.2] |
99.0 [26.2] |
104.5 [27.6] |
120.4 [27.1] |
112.7 [29.8] |
| Weight | kg [lb] | 7.2 [15.8] |
7.3 [16.1] |
7.4 [16.3] |
7.5 [16.5] |
7.6 [16.7] |
7.8 [17.1] |
7.9 [17.4] |
7.9 [17.5] |
8.1 [17.8] |
8.3 [18.2] |
8.4 [18.6] |
8.6 [19.0] |
8.8 [19.6] |
9.0 [19.8] |
9.1 [20.2] |
9.4 [20.7] |
| Mass moment of inertia | x 10-6 kg•m2 [x 10-6 lb•ft2] |
60 [40] |
71 [53] |
77 [57] |
85 [63] |
92 [68] |
104 [77] |
105 [77] |
119 [88] |
128 [95] |
141 [104] |
157 [116] |
170 [125] |
188 [139] |
Markets and Applications
Danfoss cast iron gear pumps are designed for use in a variety of markets and applications, including:
- Industrial manufacturing: These pumps are used in various industrial processes such as pumping liquids, transferring fluids, and circulating cooling fluids.
- Oil and gas: These pumps are used in the extraction, transportation, and refinement of oil and gas.
- Chemical processing: These pumps are used in chemical processing plants to transfer hazardous and corrosive liquids.
- Agriculture: These pumps are used in irrigation systems, fertilization systems, and other agricultural applications.
- Power generation: These pumps are used in power plants to transfer water and other fluids for cooling and other processes.
- Marine: These pumps are used in ships and other marine vessels for a variety of applications, including bilge pumping, ballast pumping, and fuel transfer.
- Water and wastewater treatment: These pumps are used in water and wastewater treatment plants for sludge transfer and other processes.
- Food and beverage: These pumps are used in food processing and beverage production facilities to transfer liquids and viscous substances.
- Pharmaceutical: These pumps are used in the production and processing of pharmaceutical products.
- Aerospace: These pumps are used in aircraft and other aerospace applications to transfer fluids and gases.
Download
Danfoss Cast Iron Gear Pumps Service Manual
FAQS
- What is the suction port size for the Danfoss XD58?
The suction port size for the Danfoss XD58 is ¾” BSPP (British Standard Pipe Parallel) or 1 ¼” NPT (National Pipe Thread). This ensures maximum efficiency and performance from this heavy-duty cast iron gear pump. With its robust construction, it is designed to be reliable and durable in challenging conditions.
- What is the maximum speed that the Danfoss XD58 can operate at?
The Danfoss XD58 is designed to operate at a maximum speed of 1,500 RPM. In addition, it offers a range of continuous operating pressures up to 25 bar (362 psi) and intermittent peak pressures up to 40 bar (580 psi). With its robust design and industry-leading efficiency, the Danfoss XD58 Cast Iron Gear Pumps provide reliable performance for high-pressure fluid transfer applications.
- What is the maximum temperature that the Danfoss XD58 can operate at?
The Danfoss XD58 Cast Iron Gear Pumps can easily operate up to 130°C (266°F). It is also designed to handle high-temperature applications with a maximum operating temperature of 180°C (356°F).
